Balancer puller and installer, 945G1
Price:
157.40лв.
-
Code:126364
-
Weight:2.500 Kgs
Balancer puller and installer, 945G1
Estimated Shipping
to Varna starts at
8.37лв.
outside Varna starts at
8.37лв.
to Varna starts at
4.43лв.
outside Varna starts at
4.62лв.
Balancer puller and installer, 945G1
Pulling Balancers:
Install correct threaded adapter stud into the center screw and puller nut as shown. Screw into end of crankshaft. Position the pulle tool with bearing TOWARDS the crankshaft. Install two or three bolts (as required) thru the piate into the balancer. While holding the end of the center screw with a wrencn, turn the puller nut to remove balancer.
Install correct threaded adapter stud into the center screw and puller nut as shown. Screw into end of crankshaft. Position the pulle tool with bearing TOWARDS the crankshaft. Install two or three bolts (as required) thru the piate into the balancer. While holding the end of the center screw with a wrencn, turn the puller nut to remove balancer.
Installing Balancers:
Install correct threaded adapter stud into the center screw and puller nut as shown. Position the balancer on the crankshaft as straight as possible. Position puller plate with booring facing AWAY from balancer. Turn puller nut to install.
Install correct threaded adapter stud into the center screw and puller nut as shown. Position the balancer on the crankshaft as straight as possible. Position puller plate with booring facing AWAY from balancer. Turn puller nut to install.
Contents:
- 1 puller plate
- 12 screws, each 3 pieces:
3/8NC16 X 57 MM - 57 MM X 3/8NC24
M6 X 1.0 X 60 MM - M8 X 1.25 X 60 MM
- 1 center bolt 10 mm
- 9 adapters:
M12 X 1.5 - 3/8NC16
M14 X 1.5 - 3/8NC16
M16 X 2.0 - 3/8NC16
1 / 2 X NC20 - 3/8NC16
9 / 16 x nC18 - 3/8NC16
7 / 16 X NC20 - 3/8NC16
3 / 4 X NC16 - 3/8NC16
5 / 8 x nC18 - 3/8NC16
3 / 8 X NC16 - 3/8NC16
Made in Force, Taiwan
Code: 560008
International shipment available. Please ask for price.